Keeping your tyres in excellent condition is a necessary element of vehicle upkeep, and it is both illegal and harmful to drive with non-roadworthy tyres. There are a number of things you need to consider with respect to tyre upkeep. This article takes a look at 5 critical car and truck tyre maintenance tips so you can drive confidently and safely.
1. Tyre rotation
Tyres are frequently moved from one position on the automobile to another to make sure even use and tear. Front tyres bring more of the automobile” s weight and tend to use out at about two times the rate of rear tyres, so turning the tyres can extend their life. Vehicle manufacturers differ in their recommendations, however the majority of producers advise tyres need to be turned every 8,000 to 10,000 kms.
There are 4 common kinds of tire rotation:
- Cross rotation
- Straight rotation
- 5 tyre rotation
- 4 Wheel drive
2. Tire pressure
Tire pressure is of vital value for 2 fundamental factors. Having effectively inflated tyres protects versus tyre damage and minimizes the possibility that the automobile will draw out of control. Driving with low pressure tires likewise increases fuel intake. You must check your tyre pressure a minimum of monthly, regularly if you drive lots of kilometres and always before setting out on any long journey. Tyres must not be hot when inspected, otherwise add 4 to 5 PSI to the suggested pressure. To discover the correct tire pressure for your automobile, inspect the user manual, the label on the door or inside the fuel flap. The suggested pressure is not composed on the tyre itself.
3. Tire tread depth
Tyre tread is important because it assists get rid of water between the tyre and road, making sure the cars and truck stays under control and avoiding the danger of aquaplaning. Tyres wear over time, and this can be sped up by irregular road surface areas, the tire style itself and driving practices such as high-speed driving and difficult braking. The minimum tread depth differs really slightly from state to state, however is in between 1.5 mm and 1.6 mm. In Western Australia for instance, it is 1.5 mm. If in doubt, please check your state federal government’& rsquo; s transportation department. The tread depth determines the depth over the face of the tread that is in contact with the road. It’& rsquo; s simple to see if the tire fulfills this by checking the tread wear indicator bars, placed at regular points across the tread –– they will be level with the tread blocks when the minimum tread is reached.
4. Wheel alignment
Wheel alignment is the process of correctly aligning the wheels and axles. It ensures that your cars and truck manages at its maximum level, increasing security along with securing tyres against premature wear and saving fuel. Wheel balancing balances the wheel and tires. It safeguards the bearings and suspension, prevents premature tire wear and stops vibration. Out of balance wheels, and the vibration they trigger, is normally most visible when driving at high speeds.
5. Repair and replacement
If you are in any doubt as to the roadworthiness of your tyres, you should take them to a specialist to examine. Experts can examine the internal condition of the tire in addition to the outdoors, abide by all proper procedures for disassembling, fixing and re-assembling, ensure compliance with all legal and makers’ ‘ requirements and make sure the tire is re-fitted optimally.
Nevertheless, there comes a time when tyres need to be replaced. This depends on different factors, including kilometres driven and driving style, however also environment and storage. It is necessary to check your tyres regularly and change them when needed, for example when they reach the minimum tread depth.
At Leeuwin Tyres we happily take care of all car tyre upkeep If you wish to discover more please enquire now